{"product_id":"5150-wisefab-front-drift-angle-kit-bmw-f8x","title":"Wisefab Front Drift Angle Kit, BMW F8X","description":"\u003cp\u003eThe Wisefab BMW F-Series angle kit is compatible with various BMW models, including the F80 M3, F82 M4, and F87 M2. All metal components of the Wisefab front suspension, such as sheet metal parts, tubes, tube ends, and rod end housings, are made from high-strength steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Alignment Parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\" data-mce-style=\"padding-left: 40px;\"\u003eToe in\/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0\u003cbr\u003eCamber: -4.5 +\/-0.5\u003cbr\u003eCaster: 6 +\/-0,5\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e65 degrees of lock, parallel steering\u003c\/strong\u003e\u003cbr\u003eThe steering geometry can be tuned towards either positive or negative Ackermann in just a few minutes, even at trackside, without disrupting the alignment. An Ackermann adjustment kit is included.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable lock stopper\u003cbr\u003e\u003c\/strong\u003eThe one-piece lower control arm design allows for easy caster adjustment. The lower links are replaced with a single arm. When drifting with a higher steering angle, stiffness and packaging can become issues; therefore, a one-piece lower arm is used.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting hardware for E9X hydraulic steering rack\u003c\/strong\u003e\u003cbr\u003eThis kit works well with the F-Series steering rack, though many customers prefer to use a fully hydraulic steering rack instead of the electric version. It includes the necessary hardware to mount the E9X steering rack into the F-Series subframe.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigher roll center (RC)\u003c\/strong\u003e\u003cbr\u003eOn the Wisefab knuckle, joints are lowered, raising the front roll center (RC) on a lowered car. This provides higher roll stiffness, allowing the removal of the front anti-roll bar (sway bar), which can be challenging to fit with high lock angles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVery good camber control and minimal bump steer with high steering angles\u003c\/strong\u003e\u003cbr\u003eOn drift cars, dynamic camber and bump steer are much more important than static measurements. With the kinematics of this design, the camber ensures excellent front grip, and bump steer is minimal across the entire range of steering.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteering jacking control\u003c\/strong\u003e\u003cbr\u003eDuring drifting, as the steering angle increases, so does the jacking effect, even with the same geometry, which can potentially lead to handling issues. However, we've modified the geometry to mitigate any problems arising from increased jacking, ensuring smooth handling even at extreme steering angles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent and predictable self-alignment torque\u003c\/strong\u003e\u003cbr\u003eCaster isn't the sole crucial parameter for ensuring sufficient self-alignment torque, particularly at high lock. It's the interplay of various parameters that uphold consistent trail and self-alignment torque. With the Wisefab setup, the steering wheel consistently follows the direction of movement and doesn't become stuck at full lock, thanks to the optimized combination of these factors.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal wheelspeed sensor (ABS sensor) can be used\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKit Contents:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable coilover upper mounts, Formula Drift compliance\u003c\/li\u003e\n\u003cli\u003eKnuckles with hardware\u003c\/li\u003e\n\u003cli\u003eLower control arms\u003c\/li\u003e\n\u003cli\u003eAssembeled tie rods\u003c\/li\u003e\n\u003cli\u003eBrake adapters for M model brakes\u003c\/li\u003e\n\u003cli\u003eCoilover adapter sleeve\u003c\/li\u003e\n\u003cli\u003eSteering rack mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cdiv class=\"product attribute description\"\u003e\n\u003cdiv class=\"value\"\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit assumes coilovers to have enough clearance \u003c\/li\u003e\n\u003cli\u003eRide height is designed to be ~80mm from front subframe to ground\u003c\/li\u003e\n\u003cli\u003eDepending on rim width and ET, wider fenders or fender flares may be needed\u003c\/li\u003e\n\u003cli\u003eInner wheel wells do not need to be modified with tire diameter up to 635mm (215\/45R17, 225\/45R17, 235\/40R17, 225\/40R18, etc)\u003c\/li\u003e\n\u003cli\u003eMinimum rim diameter is 17”\u003c\/li\u003e\n\u003cli\u003eRecommended backspacing is ~135mm (7“ ET45; 8“ ET35; 9“ ET20)\u003c\/li\u003e\n\u003cli\u003eIf ET is smaller, then wheels stay more outwards, if ET is bigger, then spacers will be required\u003c\/li\u003e\n\u003cli\u003eThe kit is designed to ensure that after installation and toe adjustment, it's immediately ready for use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eSupplied in Egypt by iCode — the official 5150 AutoSport dealer.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePrice shown in EGP is an estimate at today's exchange rate. Final price confirmed after shipping and customs fees.\u003c\/em\u003e\u003c\/p\u003e","brand":"Wisefab","offers":[{"title":"Default Title","offer_id":68330007560391,"sku":"WIS-WF220","price":153984.96,"currency_code":"EGP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/2108\/3847\/files\/BMW-F80-F82-F87-Dirft-Arm-Kit.webp?v=1794334474","url":"https:\/\/icode-egypt.com\/products\/5150-wisefab-front-drift-angle-kit-bmw-f8x","provider":"iCode - EG","version":"1.0","type":"link"}